Selected Journal Publications

J. Wijnen, J. Parker, M. Gagliano, E. Martínez-Pañeda
A computational framework to predict weld integrity and microstructural heterogeneity: application to hydrogen transmission
MATERIALS AND DESIGN 249, 113533 (2025)

E. García-Macías, Z.D. Harris, E. Martínez-Pañeda
TDS Simulator: A MATLAB App to model temperature-programmed hydrogen desorption
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY 94, 510-524 (2024)

T. Clayton, R. Duddu, T. Hageman, E. Martínez-Pañeda
The influence of firn-layer material properties on surface crevasse propagation in glaciers and ice shelves
THE CRYOSPHERE 18, 5573–5593 (2024)

C. Santos Maldonado, A. Zafra, E. Martínez-Pañeda, P. Sandmann, R. Morana, M.-S. Pham
Influence of dislocation cells in the hydrogen diffusivity, trapping and embrittlement of wrought and additively manufactured Inconel 718
COMMUNICATIONS MATERIALS 5, 223 (2024)

E. Korec, M. Jirasek, H.S. Wong, E. Martínez-Pañeda
Unravelling the interplay between steel rebar corrosion rate and corrosion-induced cracking of reinforced concrete
CEMENT AND CONCRETE RESEARCH 186, 107647 (2024)

M. Makuch, S. Kovacevic, M.R. Wenman, E. Martínez-Pañeda
A nonlinear phase-field model of corrosion with charging kinetics of electric double layer
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING 32, 075012 (2024)

T. Hageman, J. Mejía, R. Duddu, E. Martínez-Pañeda
Ice viscosity governs hydraulic fracture causing rapid drainage of supraglacial lakes
THE CRYOSPHERE 18, 3991-4009 (2024)

C. Cui, P. Bortot, M. Ortolani, E. Martínez-Pañeda
Computational predictions of hydrogen-assisted fatigue crack growth
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY 72, 315-325 (2024)

L. Cupertino-Malheiros, T.K. Mandal, F. Thebault, E. Martínez-Pañeda
On the suitability of single-edge notch tension (SENT) testing for assessing hydrogen-assisted cracking susceptibility
ENGINEERING FAILURE ANALYSIS 162, 108360 (2024)

E. Korec, L. Mingazzi, F. Freddi, E. Martínez-Pañeda
Predicting the impact of water transport on carbonation-induced corrosion in variably saturated reinforced concrete
MATERIALS AND STRUCTURES 57, 91 (2024)

Y.-S. Chen, C. Huang, P.-Y. Liu, H.-W. Yen, R. Niu, P. Burr, K.L. Moore, E. Martínez-Pañeda, A. Atrens, J.M.
Cairney
Hydrogen Trapping and Embrittlement in Metals – A Review
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (IN PRESS)

M. Makuch, S. Kovacevic, M.R. Wenman, E. Martínez-Pañeda
A microstructure-sensitive electro-chemo-mechanical phase-field model of pitting and stress corrosion cracking
CORROSION SCIENCE 232, 112031 (2024)

Y. Navidtehrani, R. Duddu, E. Martínez-Pañeda
Damage Mechanics Challenge: Predictions based on the phase field method
ENGINEERING FRACTURE MECHANICS 301, 110046 (2024)

Y. Tu, B. Wu, W. Ai, E. Martínez-Pañeda
Influence of concentration-dependent material properties on the fracture and debonding of electrode particles with core-shell structure
JOURNAL OF POWER SOURCES 603, 234395 (2024)

E. Martínez-Pañeda
Phase-field simulations opening new horizons in corrosion research
MRS BULLETIN 49, 603–612 (2024)

L. Cupertino-Malheiros, M. Duportal, T. Hageman, A. Zafra, E. Martínez-Pañeda
Hydrogen uptake kinetics of cathodic polarized metals in aqueous electrolytes
CORROSION SCIENCE 231, 111959 (2024)

A. Boyce, E. Martínez-Pañeda, P.R. Shearing
The role of chemo-mechanical modelling in the development of battery technology – a perspective
JOURNAL OF PHYSICS: ENERGY 6, 021001 (2024)

S. Lucarini, E. Martínez-Pañeda
UMAT4COMSOL: An Abaqus user material (UMAT) subroutine wrapper for COMSOL
ADVANCES IN ENGINEERING SOFTWARE 190, 103610 (2024)

A. Baktheer, E. Martínez-Pañeda, F. Aldakheel
Phase field cohesive zone modeling for fatigue crack propagation in quasi-brittle materials
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING 422, 116834 (2024)

T. K. Mandal, J. Parker, M. Gagliano, E. Martínez-Pañeda
Computational predictions of weld structural integrity in hydrogen transport pipelines
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (IN PRESS)

E. Korec, M. Jirasek, H.S. Wong, E. Martínez-Pañeda
Phase-field chemo-mechanical modelling of corrosion-induced cracking in reinforced concrete subjected to non-uniform chloride-induced corrosion
THEORETICAL AND APPLIED FRACTURE MECHANICS 129, 104233 (2024)

G. Álvarez, Z. Harris, K. Wada, C. Rodríguez, E. Martínez-Pañeda
Hydrogen embrittlement susceptibility of additively manufactured Stainless Steel 316L: influence of postprocessing, printing direction, temperature and pre-straining.
ADDITIVE MANUFACTURING 78, 103834 (2023)

C. Konstantinou, E. Martínez-Pañeda, G. Biscontin, N.A. Fleck
Fracture of bio-cemented sands
EXTREME MECHANICS LETTERS 64, 102086 (2023)

H.C.W. Parks, A.M. Boyce, A. Wade, T.M.M. Heenan, C. Tan, E. Martínez-Pañeda, P.R. Shearing, D.J.L. Brett, R. Jervis
Direct Observations of Electrochemically Induced Intergranular Cracking in NMC811 Particles
JOURNAL OF MATERIALS CHEMISTRY A 11, 21322 (2023)

I. Holte, K.L. Nielsen, E. Martínez-Pañeda, C.F. Niordson
A micro-mechanics based extension of the GTN continuum model accounting for random void distributions
EUROPEAN JOURNAL OF MECHANICS A/SOLIDS 104, 105123 (2024)

T. Hageman, E. Martínez-Pañeda
A phase field-based framework for electro-chemo-mechanical fracture: crack-contained electrolytes, chemical reactions and stabilisation
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING 415, 116235 (2023)

A. Islas, A. Rodríguez-Fernández, C. Betegón, E. Martínez-Pañeda, A. Pandal
Biomass dust explosions: CFD simulations and venting experiments in a 1 m3 silo
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION 176, 1048-1062 (2023)

A. Raina, V.S. Deshpande, E. Martínez-Pañeda, N.A. Fleck
Analysis of hydrogen diffusion in the three stage electro-permeation test
CONTINUUM MECHANICS AND THERMODYNAMICS 36, 1169-1180 (2024)

E. Korec, M. Jirasek, H.S. Wong, E. Martínez-Pañeda
A phase-field chemo-mechanical model for corrosion-induced cracking in reinforced concrete
CONSTRUCTION AND BUILDING MATERIALS 393, 131964 (2023)

T. Hageman, C. Andrade, E. Martínez-Pañeda
Corrosion rates under charge-conservation conditions
ELECTROCHIMICA ACTA 461, 142624 (2023)

C. Cui, R. Ma, E. Martínez-Pañeda
Electro-chemo-mechanical phase field modeling of localized corrosion: theory and COMSOL implementation
ENGINEERING WITH COMPUTERS 39, 3877–3894 (2023)

S. Kovacevic, W. Ali, E. Martínez-Pañeda, J. LLorca
Phase-field modeling of pitting and mechanically-assisted corrosion of Mg alloys for biomedical applications
ACTA BIOMATERIALIA 164, 641-658 (2023)

P.K. Kristensen, A. Golahmar, E. Martínez-Pañeda, C.F. Niordson
Accelerated high-cycle phase field fatigue predictions
EUROPEAN JOURNAL OF MECHANICS A/SOLIDS 100, 104991 (2023)

K. Au-Yeung, A. Quintanas-Corominas, E. Martínez-Pañeda, W. Tan
Hygroscopic phase Field modelling of composite materials
ENGINEERING WITH COMPUTERS 39, 3847–3864 (2023)

S. Lucarini, F.P.E. Dunne, E. Martínez-Pañeda
An FFT-based crystal plasticity phase-field model for micromechanical fatigue cracking based on the stored energy density
INTERNATIONAL JOURNAL OF FATIGUE 172, 107670 (2023)

A. Zafra, G. Álvarez, G. Benoit, G. Henaff, E. Martínez-Pañeda, C. Rodríguez, J. Belzunce
Hydrogen-assisted fatigue crack growth: pre-charging vs in-situ testing in gaseous environments
MATERIALS SCIENCE & ENGINEERING A 871, 144885 (2023)

T. Hageman, E. Martínez-Pañeda
Stabilising effects of lumped integration schemes for the simulation of metal-electrolyte reactions
JOURNAL OF THE ELECTROCHEMICAL SOCIETY 170, 021511 (2023)

L. Quinteros, E. García-Macías, E. Martínez-Pañeda
Electromechanical phase-field fracture modelling of piezoresistive CNT-based composites
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING 407, 115941 (2023)

A. Golahmar, C.F. Niordson, E. Martínez-Pañeda
A phase field model for high-cycle fatigue: total-life analysis
INTERNATIONAL JOURNAL OF FATIGUE 170, 107558 (2023)

J.A. Lewis, S.E. Sandoval, Y. Liu, D.L. Nelson, S.G. Yoon, R. Wang, Y. Zhao, M. Tian, P. Shevchenko, E. Martínez-Pañeda, M.T. McDowell.
Accelerated Short Circuiting in Anode-Free Solid-State Batteries Driven by Local Lithium Depletion
ADVANCED ENERGY MATERIALS 13, 2204186 (2023)

J.C. García-Merino, C. Calvo-Jurado, E. Martínez-Pañeda, E. García-Macías

Multielement polynomial chaos Kriging-based metamodelling for Bayesian inference of non-smooth systems

APPLIED MATHEMATICAL MODELLING 116, 510-531 (2023)

A. Zafra, Z. Harris, E. Korec, E. Martínez-Pañeda

On the relative efficacy of electropermeation and isothermal desorption approaches for measuring hydrogen diffusivity

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY 48, 1218-1233 (2023)

T. Hageman, E. Martínez-Pañeda

An electro-chemo-mechanical framework for predicting hydrogen uptake in metals due to aqueous electrolytes

CORROSION SCIENCE 208, 110681 (2022)

Y. Navidtehrani, C. Betegón, R.W. Zimmerman, E. Martínez-Pañeda

Griffith-based analysis of crack initiation location in a Brazilian test

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES 159, 105227 (2022)

Y. Navidtehrani, C. Betegón, E. Martínez-Pañeda

A general framework for decomposing the phase field fracture driving force, particularised to a Drucker-Prager failure surface

THEORETICAL AND APPLIED FRACTURE MECHANICS 121, 103555 (2022)

T. Clayton, R. Duddu, M. Siegert, E. Martínez-Pañeda

A stress-based poro-damage phase field model for hydrofracturing of creeping glaciers and ice shelves

ENGINEERING FRACTURE MECHANICS 272, 108693 (2022)

A. Díaz, J.M. Alegre, I.I. Cuesta, E. Martínez-Pañeda, Z. Zhang

Notch fracture predictions using the phase field method for Ti-6Al-4V produced by Selective Laser Melting after different post-processing conditions

THEORETICAL AND APPLIED FRACTURE MECHANICS 121, 103510 (2022)

A. Valverde-González, E. Martínez-Pañeda, A. Quintanas-Corominas, J. Reinoso, M. Paggi

Computational modelling of hydrogen assisted fracture in polycrystalline materials

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY 47 (75), 32235-32251 (2022)

A. Islas, A. Rodríguez Fernández, C. Betegón, E. Martínez-Pañeda, A. Pandal

Computational Assessment of Biomass Dust Explosions in the 20L Sphere

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION 165, 791-814 (2022)

Y. Zhao, R. Wang, E. Martínez-Pañeda

A phase field electro-chemo-mechanical formulation for predicting void evolution at the Li-electrolyte interface in all-solid-state batteries

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS 167, 104999 (2022)

W. Ai, B. Wu, E. Martínez-Pañeda

A coupled phase field formulation for modelling fatigue cracking in lithium-ion battery electrode particles

JOURNAL OF POWER SOURCES 544, 231805 (2022)

C. Cui, R. Ma, E. Martínez-Pañeda

A generalised, multi-phase-field theory for dissolution-driven stress corrosion cracking and hydrogen embrittlement

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS 166, 104951 (2022)

R. Fernández-Sousa, C. Betegón, E. Martínez-Pañeda

Cohesive zone modelling of hydrogen assisted fatigue crack growth: the role of trapping

INTERNATIONAL JOURNAL OF FATIGUE 162, 106935 (2022)

L. Quinteros, E. García-Macías, E. Martínez-Pañeda

Micromechanics-based phase field fracture modelling of CNT composites

COMPOSITES PART B: ENGINEERING 236, 109788 (2022)

A. Boyce, E. Martínez-Pañeda, A. Wade, Y.S. Zhang, J.J. Bailey, T.M.M. Heenan, D.J.L. Brett, P.R. Shearing

Cracking predictions of lithium-ion battery electrodes by X-ray computed tomography and modelling

JOURNAL OF POWER SOURCES 526, 231119 (2022)

W. Tan, E. Martínez-Pañeda

Phase field fracture predictions of microscopic bridging behaviour of composite materials

COMPOSITE STRUCTURES 286, 115242 (2022)

M. Simoes, C. Braithwaite, A. Makaya, E. Martínez-Pañeda

Modelling fatigue crack growth in Shape Memory Alloys

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES 45: 1243-1257 (2022)

A. Islas, A. Rodríguez Fernández, C. Betegón, E. Martínez-Pañeda, A. Pandal

CFD simulations of turbulent dust dispersion in the 20 L vessel using OpenFOAM

POWDER TECHNOLOGY 397, 117033 (2022)

A. Zafra, Z. Harris, C. Sun, E. Martínez-Pañeda

Comparison of hydrogen diffusivities measured by electrochemical permeation and temperature-programmed desorption in cold-rolled pure iron

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING 98, 104365 (2022)

Z. Khalil, A.Y. Elghazouli, E. Martínez-Pañeda

A generalised phase field model for fatigue crack growth in elastic-plastic solids with an efficient monolithic solver

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING 388, 114286 (2022)

V. Shlyannikov, E. Martínez-Pañeda, A. Tumanov, R. Khamidullin

Mode I and Mode II stress intensity factors and dislocation density behaviour in strain gradient plasticity

THEORETICAL AND APPLIED FRACTURE MECHANICS 116, 103128 (2021)

A. Golahmar, P.K. Kristensen, C.F. Niordson, E. Martínez-Pañeda

A phase field model for hydrogen-assisted fatigue

INTERNATIONAL JOURNAL OF FATIGUE 154, 106521 (2022)

S.S. Shishvan, S. Assadpour-asl, E. Martínez-Pañeda

A mechanism-based gradient damage model for metallic fracture

ENGINEERING FRACTURE MECHANICS 255, 107927 (2021)

M. Isfandbod, E. Martínez-Pañeda

A mechanism-based multi-trap phase field model for hydrogen assisted fracture

INTERNATIONAL JOURNAL OF PLASTICITY 144, 103044 (2021)

E. Martínez-Pañeda

Progress and opportunities in modelling environmentally assisted cracking

RILEM TECHNICAL LETTERS 6, 70-77 (2021) [Gustavo Colonnetti Medal invited paper]

Y. Navidtehrani, C. Betegón, E. Martínez-Pañeda

A simple and robust Abaqus implementation of the phase field fracture method

APPLICATIONS IN ENGINEERING SCIENCE 6, 100050 (2021)

Y. Navidtehrani, C. Betegón, E. Martínez-Pañeda

A unified Abaqus implementation of the phase field fracture method using only a user material subroutine

MATERIALS 14(8): 1913 (2021)

P.K. Kristensen, C.F. Niordson, E. Martínez-Pañeda

An assessment of phase field fracture: crack initiation and growth

PHILOSOPHICAL TRANSACTONS OF THE ROYAL SOCIETY A 379, 20210021 (2021)

P. Verma, J. Ubaid, A. Schiffer, A. Jain, E. Martínez-Pañeda, S. Kumar

Essential work of fracture assessment of acrylonitrile butadiene styrene (ABS) processed via fused filament fabrication additive manufacturing

THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 113, 771-784 (2021)

C. Cui, R. Ma, E. Martínez-Pañeda

A phase field formulation for dissolution-driven stress corrosion cracking

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS 147, 104254 (2021)

P.K. Kristensen, C.F. Niordson, E. Martínez-Pañeda

Applications of phase field fracture in modelling hydrogen assisted failures

THEORETICAL AND APPLIED FRACTURE MECHANICS 110, 102837 (2020)

I. Holte, A. Srivastava, E. Martínez-Pañeda, C.F. Niordson, K.L. Nielsen

Interaction of void spacing and material size effect on inter-void flow localisation

JOURNAL OF APPLIED MECHANICS 88(2), 021010 (9 pages) (2021)

W. Tan, E. Martínez-Pañeda

Phase field predictions of microscopic fracture and R-curve behaviour of fibre-reinforced composites

COMPOSITES SCIENCE AND TECHNOLOGY 202, 108539 (2021)

A. Díaz, A. Zafra, E. Martínez-Pañeda, J.M. Alegre, J. Belzunce, I.I. Cuesta

Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

THEORETICAL AND APPLIED FRACTURE MECHANICS 110, 102818 (2020)

V. Shlyannikov, E. Martínez-Pañeda, A. Tumanov, A. Tartygasheva

Crack tip fields and fracture resistance parameters based on strain gradient plasticity

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 208-209, 63-82 (2021)

M. Simoes, E. Martínez-Pañeda

Phase field modelling of fracture and fatigue in Shape Memory Alloys

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING 373, 113504 (2021)

S. Askarinejad, E. Martínez-Pañeda, I.I. Cuesta, N.A. Fleck

Mode II fracture of an MMA adhesive layer: theory versus experiment

EUROPEAN JOURNAL OF MECHANICS A / SOLIDS 86, 104133 (2021)

R. Fernández-Sousa, C. Betegón, E. Martínez-Pañeda

Analysis of the influence of microstructural traps on hydrogen assisted fatigue

ACTA MATERIALIA 199, 253-263 (2020)

S. Fuentes-Alonso, E. Martínez-Pañeda

Fracture in distortion gradient plasticity

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE 156, 103369 (2020)

P.K. Kristensen, C.F. Niordson, E. Martínez-Pañeda

A phase field model for elastic-gradient-plastic solids undergoing hydrogen embrittlement

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS 143, 104093 (2020)

M.A. Saeimi Sadigh, B. Paygozar, L.F.M. da Silva, E. Martínez-Pañeda

Creep behaviour and tensile response of adhesively bonded polyethylene joints: single-lap and double-strap

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES 102, 102666 (2020)

A. Díaz, I.I. Cuesta, E. Martínez-Pañeda, J.M. Alegre

Influence of charging conditions on simulated temperature-programmed desorption for hydrogen in metals

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 45: 23704-23720 (2020)

L. García-Guzmán, J. Reinoso, A. Valverde, E. Martínez-Pañeda, L. Távara

Numerical study of interface cracking in composite structures using a novel geometrically nonlinear Linear Elastic Brittle Interface Model: mixed-mode fracture conditions and application to structured interfaces

COMPOSITE STRUCTURES 248, 112495 (2020)

E. Martínez-Pañeda, A. Díaz, L. Wright, A. Turnbull

Generalised boundary conditions for hydrogen transport at crack tips

CORROSION SCIENCE, 173: 108698 (2020)

Hirshikesh, E. Martínez-Pañeda, S. Natarajan

Adaptive phase field modelling of crack propagation in orthotropic functionally graded materials

DEFENCE TECHNOLOGY 17, 185-195 (2021)

P.K. Kristensen, E. Martínez-Pañeda

Phase field fracture modelling using quasi-Newton methods and a new adaptive step scheme

THEORETICAL AND APPLIED FRACTURE MECHANICS, 107: 102446 (2020)

A. Díaz, I.I. Cuesta, E. Martínez-Pañeda, J.M. Alegre

Analysis of hydrogen permeation tests considering two different modelling approaches for grain boundary trapping in iron

INTERNATIONAL JOURNAL OF FRACTURE, 223: 17-35 (2020)

E. Martínez-Pañeda, Z. Harris, S. Fuentes-Alonso, J.R. Scully, J.T. Burns

On the suitability of slow strain rate tensile testing for assessing hydrogen embrittlement susceptibility

CORROSION SCIENCE, 163: 108291 (2020)

E. Martínez-Pañeda, I.I. Cuesta, N.A. Fleck

Mode II fracture of an elastic-plastic sandwich layer

JOURNAL OF APPLIED MECHANICS, 87(3): 031001 (11 pages) (2020)

I.I. Cuesta, E. Martínez-Pañeda, A. Díaz, J.M. Alegre

Cold Isostatic Pressing to improve the mechanical performance of additively manufactured metallic components

MATERIALS 12(15): 2495 (2019)

I.I. Cuesta, E. Martínez-Pañeda, A. Díaz, J.M. Alegre

The Essential Work of Fracture Parameters for 3D printed polymer sheets

MATERIALS AND DESIGN, 181: 107968 (2019)

E. Martínez-Pañeda, S. Fuentes-Alonso, C. Betegón

Gradient-enhanced statistical analysis of cleavage fracture

EUROPEAN JOURNAL OF MECHANICS A / SOLIDS, 77: 103785 (2019)

Hirshikesh, S. Natarajan, R.K. Annabattula, E. Martínez-Pañeda

Phase field modelling of crack propagation in functionally graded materials

COMPOSITES PART B: ENGINEERING, 169: 239-248 (2019)

E. Martínez-Pañeda, N.A. Fleck

Mode I crack tip fields: strain gradient plasticity theory versus J2 flow theory

EUROPEAN JOURNAL OF MECHANICS A / SOLIDS, 75: 381-388 (2019)

E. Martínez-Pañeda, V.S. Deshpande, C.F. Niordson, N.A. Fleck

The role of plastic strain gradients in the crack growth resistance of metals

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 126: 136-150 (2019)

E. Martínez-Pañeda

On the finite element implementation of functionally graded materials

MATERIALS, 12(2): 287 (2019)

K.J. Juul, E. Martínez-Pañeda, K.L. Nielsen, C.F. Niordson

Steady-state fracture toughness of elastic-plastic solids: Isotropic versus kinematic hardening

ENGINEERING FRACTURE MECHANICS, 207: 254-268 (2019)

I.I. Cuesta, A. Willig, A. Díaz, E. Martínez-Pañeda, J.M. Alegre

Pre-notched dog bone small punch specimens for the estimation of fracture properties

ENGINEERING FAILURE ANALYSIS, 96: 236-240 (2019)

E. Martínez-Pañeda, A. Golahmar, C.F. Niordson

A phase field formulation for hydrogen assisted cracking

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 342: 742-761 (2018)

E. Martínez-Pañeda, N.A. Fleck

Crack growth resistance in metallic alloys: the role of isotropic versus kinematic hardening

JOURNAL OF APPLIED MECHANICS, 85: 111002 (6 pages) (2018)

T.V. Mathew, S. Natarajan, E. Martínez-Pañeda

Size effects in elastic-plastic functionally graded materials

COMPOSITE STRUCTURES, 204: 43-51 (2018)

E. Martínez-Pañeda, S. del Busto, C. Betegón

Non-local plasticity effects on notch fracture mechanics

THEORETICAL AND APPLIED FRACTURE MECHANICS, 92: 276-287 (2017)

S. del Busto, C. Betegón, E. Martínez-Pañeda

A cohesive zone framework for environmentally assisted fatigue

ENGINEERING FRACTURE MECHANICS, 185: 210-226 (2017)

E. Martínez-Pañeda, S. Natarajan, S. Bordas

Gradient plasticity crack tip characterization by means of the extended finite element method

COMPUTATIONAL MECHANICS, 59: 831-842 (2017)

G. Papazafeiropoulos, M. Muñiz-Calvente, E. Martínez-Pañeda

Abaqus2Matlab: a suitable tool for finite element post-processing

ADVANCES IN ENGINEERING SOFTWARE, 105: 9-16 (2017)

E. Martínez-Pañeda, I.I. Cuesta, I. Peñuelas, A. Díaz, J.M. Alegre

Damage modeling in small punch test specimens

THEORETICAL AND APPLIED FRACTURE MECHANICS, 86A: 51-60 (2016)

E. Martínez-Pañeda, C.F. Niordson, R.P. Gangloff

Strain gradient plasticity-based modeling of hydrogen environment assisted cracking

ACTA MATERIALIA, 117: 321-332 (2016)

E. Martínez-Pañeda, C.F. Niordson, L. Bardella

A finite element framework for distortion gradient plasticity with applications to bending of thin foils

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 96: 288-299 (2016)